Cadillac XTS 2018 Owner's Manual page 196

Setting Cruise Control
If is on when not in use, SET or
+RES could get pressed and go into
cruise when not desired. Keep
when cruise is not being used.
1. Press .
2. Get up to the desired speed.
3. Press and release SET . The
desired set speed briefly appears
in the instrument cluster.
4. Remove your foot from the
accelerator.
When the cruise control has been set
to the desired speed, a green cruise
control indicator appears on the
instrument cluster and a cruise set
speed message appears on the
Head-Up Display (HUD), if equipped.
Resuming a Set Speed
If the cruise control is set at a desired
speed and then the brakes are applied
or is pressed, the cruise control is
disengaged without erasing the set
speed from memory.
Once the vehicle speed reaches about
40 km/h (25 mph) or more, press +RES
up to the first detent briefly. The
vehicle returns to the previous set
off
speed.
Increasing Speed While Using
Cruise Control
Do one of the following:
Press and hold +RES up until the
desired speed is reached, then
release it.
To increase vehicle speed in small
increments, briefly press +RES up
to the first detent. For each press,
the vehicle goes about 1 km/h
(1 mph) faster.
To increase vehicle speed in larger
increments, briefly press +RES up
to the second detent. For each
press, the vehicle speed increases
to the next 5 km/h (5 mph) mark
on the speedometer.
DRIVING AND OPERATING
Reducing Speed While Using Cruise
Control
Do one of the following:
Press and hold SET down until
the desired lower speed is reached,
then release it.
To decrease the vehicle speed in
small increments, briefly press
SET down to the first detent. For
each press, the vehicle goes about
1 km/h (1 mph) slower.
To decrease the vehicle speed in
larger increments, briefly press
SET down to the second detent.
For each press, the vehicle speed
decreases to the next 5 km/h
(5 mph) mark on the speedometer.
The cruise control system may
automatically brake to slow the
vehicle down.
Passing Another Vehicle While
Using Cruise Control
Use the accelerator pedal to increase
the vehicle speed. When you take your
foot off the pedal, the vehicle will slow
down to the previous set cruise speed.
195