Upgrading The Firmware Of Lan Docking Stations - Philips LFH 9160 User Manual

Enter your changes directly in the fields of the Administration Tool's main pane.
1
Click the SUBMIT CHANGES
2
of the settings is displayed. These settings will be sent to the LAN Docking Stations after
confirmation by clicking the
Station is shown in a result window. Clicking the
but will keep the new settings stored for later submission. Upon clicking the
CHANGES button, any stored settings will be deleted.
D Note: Settings can only be uploaded to LAN Docking Stations that are currently online.
Important: Changes made to a single LAN Docking Station have precedence over any
C
settings made in the global settings form that apply to the same LAN Docking Station!
4.9

Upgrading the firmware of LAN Docking Stations

Download the latest firmware (.bce file) from www.philips.com/dictation
1
Save the .bcd file to to a network location that the LAN Docking Station can access. This can
2
be an FTP server or an HTTP Web server.
Click on the FIRMWARE UPGRADE
3
Select the type of server (FTP, SFTP, HTTP) where the .bcd file is saved.
4
Enter the domain name or IP address of the server hosting the firmware file into the
5
field.
Enter the port number of your server into the
6
to use non-standard port numbers, you should use 21 for an FTP server, 22 for an SFTP
connection and 80 for an HTTP Web server.
If your server requires authentication to download the firmware file, enter the name of the
7
user account, the password, and confirm the password. Otherwise leave the USERNAME,
PASSWORD and
Enter the full path and file name to the .bcd file of the new firmware into the
8
SERVER text field.
Press the UPGRADE NOW
9
D Note: The current firmware version of a LAN Docking Station can be found in the
FIRMWARE column of the Administration Tool's main pane.
2
button in the bottom right corner of the form. An overview
OK button. The result of the operation of each LAN Docking
button on the symbol bar of the Administration Tool
CONFIRM PASSWORD
button to start the upgrade process.
CANCEL button will close the overview,
PORT field. Unless your server is configured
text fields empty.
UNDO
SERVER
PATH ON
User manual