Ftp Settings - Philips LFH 9160 User Manual

3.5

FTP settings

Once you have your FTP server set up, you must configure the LAN Docking Station to use it. To
configure the FTP settings, follow these steps:
Open the LAN Docking Station
1
configuration interface by entering its IP
address in your Web browser or using the
LAN Docking Station Administration
If your FTP server can accept secure (SFTP)
2
connections, check the
on the FTP settings panel. Otherwise, check
the FTP radio button on the FTP settings
panel.
Enter the domain name or IP address of
3
your FTP server into the
The FTP server does not have to be on the
the local area network. If you reference the
FTP server using its domain name, make
sure that at least one DNS server is configured (see
that you are using DHCP (see
Enter the port number of your FTP server into the
4
be 21 for FTP or 22 for SFTP, unless your FTP server is configured with a nonstandard port
number.
Enter the name of the FTP user account into the
5
account you have set up to receive dictation file uploads from the LAN Docking Station. See
Setting up the FTP server
Enter the password of the FTP user account into the
6
password by typing it again into the
Enter the path to the directory to receive dictation files into the
7
you want to use the default directory of the user account, leave the field empty.
Press the SUBMIT
8
changes.
User manual
Tool.
SFTP radio button
FTP SERVER field.
Assigning an IP address from DHCP
on page 9 for more information.
CONFIRM PASSWORD
button at the bottom of the FTP settings panel in order to save your
Assigning a static IP address
on page 13).
FTP PORT field. The port number should
USERNAME field. This should be the user
PASSWORD field and confirm the
field.
PATH ON SERVER
on page 14) or
field. If
11