Synchronizing With The Processor - miniDSP 2X4 HD User Manual

6.1 S
YNCHRONIZING WITH THE PROCESSOR
Communication with the processor takes place over a USB connection. Ensure that the computer is connected
to the miniDSP 2x4 HD by a USB 2.0 port. Then click on the Connect button:
The first time you connect, or if you have made any changes to any data in the user interface, the following
dialog box will appear:
The options are:
Synchronize Config
Download the currently selected configuration into the corresponding configuration preset of
the processor. After downloading the configuration data, the plugin is in online mode and any
changes to processing parameters will be downloaded immediately in real time. That is, the user
interface is now "live."
Synchronize and Upgrade
This is similar to Synchronize Config, but also upgrades the internal data of the processor. This
option may appear after downloading and installing an updated version of the plugin.
Restore Config
Restore the data in the currently selected configuration to the factory defaults. When using this
option, any connected equipment should be muted or powered off until you have set the
configuration to a working state. Note that the configuration data will be lost, so if needed,
ensure that you have saved the configuration to a file prior to using this option.
Help This option brings up a help screen explaining the options.
Cancel This option cancels the attempt to connect to the processor. The plugin will remain in offline
mode.
miniDSP Ltd, Hong Kong / www.minidsp.com / Features and specifications subject to change without prior notice
18