The 2X4 Hd Kit Board - miniDSP 2X4 HD User Manual

5 T 2 4 HD K
HE X IT BOARD
The 2x4 HD Kit board is exactly the same as the 2x4 HD "in a box", but without the box. All functionality and I/O
is identical. The board can be built into your own box and/or combined with other boards such as power
amplifiers. This annotated photograph shows the main features of the board:
The only user-accessible jumpers are used to set the analog input sensitivity. The jumpers are located near the
RCA input jacks, and can be used to set the analog input sensitivity to either 2 VRMS or 4 VRMS, as shown by the
highlighted locations below. The default setting as shipped is 2 VRMS.
The board must be powered OFF when changing these jumpers.
16
miniDSP Ltd, Hong Kong / www.minidsp.com / Features and specifications subject to change without prior notice