D-Link DSL-2888A User Manual page 50

Section 4 - Configuration
LAN IPv6 Address Settings
Enable DHCP-PD: Enable or disable IPv6 prefix delegation.
If you disabled DHCP-PD, enter the LAN IPv6 PD Address:
LAN IPv6 PD Enter the LAN IPv6 PD Address.
Address:
LAN IPv6 Link- Displays the router's LAN IPv6 link-local address.
Local Address:
Advanced Settings - Address Autoconfiguration Settings
Enable Automatic
Enable or disable the Automatic IPv6 Address Assignment feature.
IPv6 Address
Assignment:
Autoconfiguration Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6.
Type:
If you selected SLAAC+RDNSS or Stateless DHCP as the Autoconfiguration Type:
Router Enter the router address lifetime (in minutes).
Advertisement
Lifetime:
If you selected Stateful DHCPv6 as the Autoconfiguration Type:
IPv6 Enter the IPv6 address lifetime (in minutes).
Advertisement
Lifetime:
Click Save when you are done.
D-Link DSL-2888A User Manual
Network (continued)
ADDRESS AUTOCONFIGURATION SETTINGS
Enabled
Enable Automatic IPv6 Address Assignment:
Autoconfiguration Type: SLAAC+RDNSS
IPv6 Advertisement Lifetime: 10 minutes
ADDRESS AUTOCONFIGURATION SETTINGS
Enable Automatic IPv6 Address Assignment: Enabled
Autoconfiguration Type: SLAAC+Stateless DHCP
IPv6 Advertisement Lifetime: 10 minutes
ADDRESS AUTOCONFIGURATION SETTINGS
Enable Automatic IPv6 Address Assignment: Enabled
Autoconfiguration Type: Stateful DHCPv6
Router Advertisement Lifetime: minutes
⌵
⌵
⌵
46