D-Link DSL-2888A User Manual page 19

Section 3 - Getting Started
The wizard is designed to guide you through a step-by-step process to configure your new
D-Link router and connect to the Internet.
Click Next to continue.
Please wait while your router detects your Internet connection type. If the router detects
your Internet connection, you may need to enter your ISP information such as username
and password.
Configure your Internet connection using the drop down menus. Select either ADSL or VDSL
from WAN Access Type. Use the Country and ISP drop down menus to quickly configure
the VPI, and VCI settings. To manually configure these settings, select Not Listed.
Select your ISP's Encapsulation type and click Next to continue.
D-Link DSL-2888A User Manual
Setup Wizard (continued)
Welcome
Internet
DSL-2888A
This wizard will guide you through a step-by-step process to configure your new D-Link
device.
Step 1: Install your device
Step 2: Configure your Network and Wi-Fi Settings
Step 3: Set your router password
⌵
English
ISP Settings
Internet DSL-2888A
Select your country and Internet service provider(ISP).
⌵
WAN Access Type: ADSL
⌵
Country: Australia
⌵
ISP: Not Listed
⌵
Encapsulation LLC
Wi-Fi Client
Next
Wi-Fi Client
VPI: 8
VCI: 35
Back Next
15