Get Started; Charge Power; Switch The Player On Or Off; Automatic Standby And Shut-Down - Philips GOGEAR SA3VBE04 User Manual

3 Get started

Charge power

VIBE has a built-in battery that can be charged
through the USB port of a computer.
As shown, connect the VIBE to a PC by using
the USB cable.
Note
•
When you connect
are briefly prompted to select: [Charge &
transfer] or [Charge & play].
•
VIBE automatically applies [Charge &
transfer], if no new selection is made.
Battery level indication
• When the battery is low, the
low battery screen is displayed
repeatedly.
• When the charging process is
complete,
Note
•
Rechargeable batteries have a limited number
of charge cycles. Battery life and number of
charge cycles vary by use and settings.
10 EN EN
VIBE to a computer, you
is displayed.
To conserve battery power and increase the
play time, do the following on VIBE:
• Set the backlight timer to a low value
(go to > [Display settings] >
[Backlight timer]).

Switch the player on or off

Press and hold / until the player is switched
on or off.

Automatic standby and shut-down

The player has an automatic standby and shut-
down feature that can save battery power.
After 10 minutes in idle mode (no play, no
button is pressed), the player switches off.