Update The Firmware Through Philips Songbird - Philips GOGEAR SA3VBE04 User Manual

14 Update the
firmware
through Philips
Songbird
VIBE is controlled by an internal program called
firmware. Newer versions of the firmware may
have been released after you have purchased
VIBE.
Through Philips Songbird, you can check for
and install firmware updates for VIBE over the
Internet.
Tip
•
Your music files are not affected by a firmware
update.
1
Make sure that you have connected your
PCto the Internet.
2
As shown, connect the VIBE to the PC by
using a USB cable.
3
On the PC, launch Philips Songbird.
• If necessary, click
> Philips > Philips Songbird.
42 EN
Start > Programs
4
Click VIBE in the Player pane. Then,
select Tools > Check for updated
firmware in the pop-up window.
» Philips Songbird checks for updates
and installs new firmware from the
Internet, if available.
5
Follow the on-screen instructions.
»
Downloading and installation of
firmware update start automatically.
»
The VIBE restarts after the firmware
is updated and is ready for use again.
Note
•
Wait until the update is completed, then
disconnect the VIBE from the computer.