Table of Contents
Advertisement
3 Get started
Charge power
VIBE has a built-in battery that can be charged
through the USB port of a computer.
As shown, connect the VIBE to a PC by using
the USB cable.
Note
•
When you connect
are briefly prompted to select: [Charge &
transfer] or [Charge & play].
•
VIBE automatically applies [Charge &
transfer], if no new selection is made.
Battery level indication
•
When the battery is low, the
low battery screen is displayed
repeatedly.
•
When the charging process is
complete,
Note
•
Rechargeable batteries have a limited number
of charge cycles. Battery life and number of
charge cycles vary by use and settings.
10
EN
EN
VIBE to a computer, you
is displayed.
To conserve battery power and increase the
play time, do the following on VIBE:
•
Set the backlight timer to a low value
(go to
> [Display settings] >
[Backlight timer]).
Switch the player on or off
Press and hold
/ until the player is switched
on or off.
Automatic standby and shut-down
The player has an automatic standby and shut-
down feature that can save battery power.
After 10 minutes in idle mode (no play, no
button is pressed), the player switches off.
Advertisement
Table of Contents
