Table of Contents
Advertisement
intrusion of water might cause a corrosion
inside the product.
If the result of investigation determines
that the fault is caused by any of these
exposures to water, then it will not be
covered by the warranty.
●
Do not use the product in extremely hot,
cold or humid places.
(Use within an ambient temperature range
of 5℃ to 35℃ and humidity range of 35%
to 85%.)
• Charging equipment
• Peripheral equipment
●
Do not use the product in extremely hot,
cold or humid places.
(Use within an ambient temperature range
of 5℃ to 35℃ and humidity range of 35%
to 85%. However, it may be used
temporarily for a range from 36℃ to 40℃.)
• HTV33 Main Unit
• au IC Card (installed on the HTV33 main
unit)
●
Do not use in places subject to excessive
dust or vibration. Doing so might cause a
fault.
●
Occasionally, clean the connector with a dry
cotton swab, etc. Soiled connectors might
cause poor connection. When cleaning the
connector, do not exert a strong force to
prevent deformation.
●
Clean the product with a soft dry cloth
(such as an eyeglass cleaning cloth).
Forceful rubbing with a dry cloth may
scratch the display. The display may be
stained if splashed liquid or smears are left
on the surface. Wiping the product using
alcohol, thinner, benzene, detergent, glass
cleaner, etc. might erase the printing on the
outer casing or cause discoloration.
43
Advertisement
Table of Contents
