Echo SRM-22GES Operator's Manual page 13

G138
Tap knob
Hit knob against the
ground surface lightly
Nylon line comes out
NYLON LINE HEAD
Type : G138
Left-hand thread M 10 × 1.25 pitch
Thread :
ADJUSTING NYLON LINE
• Make sure there is no bystander within 15 m radius and
pay enough attention to objects in the surroundings
before starting operation.
• Do not rotate the cutting head at more than 10,000
r/mim.
• Do not hit the cutting head against hard foreign matters
such as rocks, concrete, tree stub and bottle etc.
• When releasing Nylon line from spool hit tap knob of
spool against the ground surface lightly at rotation speed
lower than 4,500 r/min.
• Cut off knife on the shield adjusts cutting swath to 40 cm
automatically by cutting nylon lines evenly when
attachment starts rotating.
• When operating with less than maximum cutting swath
(40 cm), cut two nylon lines in equal lengths.
Use only flexible, non-metallic line recommended
by KIORITZ CORPORATION.
13
CAUTION
SRM-22GES