TP-Link Archer C55 User Manual page 60


Note:
If you check the
Wireless Password - You can enter ASCII characters between 8 and 63 characters or 8
•
to 64 Hexadecimal characters. The default password is the same with the default PIN
code, which is labeled on the bottom of the router.
Group Key Update Period - Specify the group key update interval in seconds. The
•
value should be 30 or above. Enter 0 to disable the update.
WPA /WPA2- Enterprise - It's based on Radius Server.

Authentication Type - you can choose the version of the WPA security on the
•
drop-down list. The default setting is Automatic, which can select WPA (Wi-Fi Protected
Access) or WPA2 (WPA version 2) automatically based on the wireless station's
capability and request.
Encryption - You can select either Automatic, or TKIP or AES.
•

Note:
If you check the WPA/WPA2-Enterprise
find a notice in red as shown in the following figure.
Radius Server IP - Enter the IP address of the Radius server.
•
Radius Server Port - Enter the port number of the Radius server.
•
Radius Server Password - Enter the password for the Radius server.
•
Archer C55
WPA/WPA2-Personal
find a notice in red as shown in the following figure.
AC1200 Wireless Dual Band Gigabit Router
radio button and choose TKIP encryption, you will
radio button and choose TKIP encryption, you will
- 55 -