Wps - TP-Link Archer C55 User Manual

SSID (to be bridged) - The SSID of the AP your router is going to connect to as a client.

You can also use the search function to select the SSID to join.
MAC Address (to be bridged) - The BSSID of the AP your router is going to connect to

as a client. You can also use the search function to select the BSSID to join.
Scan - Click this button, you can search the AP which runs in the current channel.

Key type - This option should be chosen according to the AP's security configuration. It

is recommended that the security type is the same as your AP's security type
WEP Index - This option should be chosen if the key type is WEP(ASCII) or

WEP(HEX).It indicates the index of the WEP key.
Authentication Type - This option should be chosen if the key type is WEP(ASCII) or

WEP(HEX).It indicates the authorization type of the Root AP.
Encryption - When WPA is set as the Authentication Type, you can select either TKIP

or AES as Encryption.
Password - If the AP your router is going to connect needs password, you need to fill

the password in this blank.
4.7.2

WPS

Choose menu "Wireless 5GHz →WPS", you can the screen as shown in the following figure.
This section will guide you to add a new wireless device to an existing network quickly by WPS
(Wi-Fi Protected Setup) function.
Archer C55 AC1200 Wireless Dual Band Gigabit Router
- 50 -