Advertisement
Bulletin No: 09-036/14
© 2014 Mazda Motor of America, Inc.
13. Attach the layered Form Rubber (B) to the back side of front door module panel, positioning one end at the
break point of butyl tape (A) and along the upper edge of the front door module panel.
14. Prepare 1 set of 2 pieces of cut Form Rubber (D) 10mm X 45mm size.
Piece
Sheet Type
D
Form Rubber
Last Issued: 08/29/2014
Sheet Thickness
5mm
Size
10mm X 45mm
Quantity
2
Page 9 of 16
Advertisement
