Panasonic SC-HT870 Service Manual page 95

file:///C|/Documents and Settings/lopez/Pulpit/s/PANASONIC SA-HT870E_EG_EB/ALL/SVC/s1403000000.html
F611 6626 QCODE don't read Error
F612 No CRC OK for a specific time
F620 Laser safeguard: high temperature condition
F621 Laser safeguard: circuit failure condition
F630 No reply to KEY DET enquiry
F631 CPPM KEY DET is not available till the FILE terminal
F632 CPPM KEY DET is not available
Disc code
F103 Illegal highlight Position
HIC Error
F4FF Force initialize failure (time out)
Micro computer error
F700 MBX overflow
F701 Message command does not end
F702 Message command changes
F880 Task number is not appropriate
F890 Sending message when message is being sent to AV task Sending message to AV task
F891 Message couldn't be sent to AV task
F893 FROM falsification
F894 EEPROM abnormality
F895 Language area abnormality
F896 No existence model
F897 Initialize is not completed
F898 Disagreement of hardware and software
F8A0 Message command is not appropriate
Note:
An error code will be canceled if a power supply is turned OFF.
*1: CPPM is the copy guard function beforehand written in the disk for protection of copyrights.
file:///C|/Documents and Settings/lopez/Pulpit/s/PANASONIC SA-HT870E_EG_EB/ALL/SVC/s1403000000.html (2 of 3)08-08-29 18:03:22
Access failure to seek address in CD series
Access failure to ID data in DVD series
(for internal use only)
(CPPM file system is unreadable caused by scratches)
Been revoked or falsified
Big possibility of disc specification violation during
highlight display
When replying message to disc manager
Next message is sent before replying to disc manager
Message is changed before it is sent as a reply to disc
manager
Message coming from a non-existing task
Begin sending message to AV task
Firm version agreement check for factory preset setting
failure prevention
Firm version agreement check for factory preset setting
failure prevention
Initialize completion check for factory preset setting failure
prevention
Unsuitable combination of AV DECORDER, SDRAM and
FLASH ROM
(firmware)
Begin sending message to AV task