Troubleshooting - GMC DB305SMS Manual

Troubleshooting

Symptom Possible Cause Solution
Plug fuse Replace fuse
Worn brushes Have brushes replaced by an authorised GMC service centre
No operation
Power tool fault Contact an authorised GMC service centre
No sliding action Slide lock engaged Release slide lock
GB
Stiff or rough sliding
Build-up of sawdust in mechanism Vacuum and lubricate mechanism
action
Teeth worn or damaged Replace blade
Incorrect saw blade type Replace blade with correct type for material being sawed
Ensure blade meets the required blade specification
Incorrect blade specification
Cutting performance
for this mitre saw
poor
Incorrectly fitted blade Remove blade and refit exactly as per the instructions in this manual
Saw blade distorted, bent or damaged Replace blade immediately
Power tool vibrating
Saw blade incorrectly mounted Re-fit blade exactly as per the instructions in this manual
excessively in use
Machine fault Contact an authorised GMC service centre
Mitre position difficult
Build-up of sawdust Vacuum up sawdust
to adjust
19