Table of Contents
Advertisement
Technical data
Dimensions (DxWxH)
60 x 60 x 85 cm (height adjustable)
Weight
approximately 45 kg
Max. capacity
7 kg
Condensate container
4.2 l
Connection voltage
Connected load
Fuse protection
see appliance rating plate
Ambient temperature
Product number/
Production number
You can find the rating plate on the back of the dryer.
Power consumption when switched off
Power consumption when ready for use (left-on mode)
Consumption values table
Spin speed which
Programme
is used for spinning
the laundry
Cottons
10 A
Cupboard dry*
1400 rpm
112 min
1000 rpm
131 min
800 rpm
150 min
Iron dry*
1400 rpm
93 min
1000 rpm
111 min
800 rpm
130 min
Easy-Care
Cupboard dry*
800 rpm
48 min
600 rpm
60 min
*
Programme setting for testing in accordance with the applicable IEC61121 standard.
** The values may differ from those specified, depending on the type of fabric, composition of laundry to be dried, residual moisture in the fabric,
the degree of dryness that has been set, the amount of laundry being loaded and the environmental conditions.
Optional accessories
(from after-sales service using order number, depending on model)
WMZ
Platform
For easier loading and unloading. The basket contained in the drawer can be used to carry the laundry.
20500
WTZ
Washer-dryer stack connection set
The dryer can be placed on top of a suitable washing machine with the same width and depth to save space. The dryer must be fastened
11310
to the washing machine using this connection set. With pull-out worktop: WTZ 11300
Connection fittings for condensation outlet
WTZ
The condensation is conveyed directly via a hose.
1110
0.10 W
1.00 W
Duration**
Energy consumption**
7 kg
3,5 kg
7 kg
16 A
10 A
16 A
10 A
16 A
98 min
93 min
63 min 3.54 kWh 3.54 kWh 1.95 kWh 1.95 kWh
115 min
100 min
70 min 4.13 kWh 4.13 kWh 2.27 kWh 2.27 kWh
133 min
116 min
86 min 4.72 kWh 4.72 kWh 2.79 kWh 2.79 kWh
69 min
78 min
48 min 2.55 kWh 2.55 kWh 1.78 kWh 1.78 kWh
82 min
87 min
57 min 3.22 kWh 3.22 kWh 2.23 kwh 2.23 kwh
94 min
98 min
68 min 3.90 kWh 3.90 kWh 2.81 kwh 2.81 kwh
3.5 kg
3.5 kg
42 min
1.35 kWh 1.35 kWh
51 min
1.65 kWh 1.65 kWh
What to do if ...
If you cannot rectify a fault yourself (e.g. switching off/on), please contact our after-sales service. We will
always find an appropriate solution and will avoid unnecessary visits by engineers. Trust the expertise of
the manufacturer and rest assured that the repair will be carried out by trained service technicians using
original spare parts. The contact details of your local after-sales service can be found in the enclosed after-
sales service directory.
When contacting the after-sales service, please quote the appliance's product number (E no.) and
production number (FD) (see the inside of the door).
Set the programme selector to Off and remove the appliance plug from the socket.
The
Start/Stop indicator lamp does
not light up.
The display panel light and indicator
lights (depending on model) go out and
the
Start/Stop indicator light flashes.
The
Container and
indicator lights are flashing.
The
Filter and
indicator lights are flashing.
Dryer does not start.
3,5 kg
Water is running out.
10 A
16 A
The door opens by itself.
Creasing.
Laundry is not dried correctly or is still
too damp.
Drying time too long.
The humidity in the room increases
significantly.
Power failure.
One or more indicator lights for
programme status are flashing.
9
Mains plug plugged in? Programme selected?
Check the socket fuse.
Energy-saving mode is activated
saving mode instructions.
Start/Stop
Empty the condensate container.
If featured, check hose for condensation outlet.
Clean the fluff filter and/or air cooler under running water
Start/Stop
Page 4/6.
Start/Stop button selected?
Door closed?
Ambient temperature greater than 5°C? The optimum ambient
temperature for drying is between 5 °C and 35 °C.
Align dryer horizontally.
Clean air cooler seal.
Push the door closed until you hear it engage.
Laundry load exceeded?
Remove articles of clothing immediately after the end of
the programme, hang up and pull into shape.
Unsuitable programme selected
After the end of the programme, warm laundry feels damper
than it actually is. Spread the laundry out and allow the heat to
disperse.
Finely adjust the dryness level – this extends the drying time but
does not increase the temperature. Your laundry will become
drier.
Select a programme with a longer drying time or increase the
drying level. This does not increase the temperature.
Select a time programme for extended drying of laundry that is
still damp.
If you have exceeded the maximum load for the programme, the
laundry may not be dried correctly.
Clean the moisture sensor in the drum. A fine layer of limescale
may adversely affect the performance of the sensors and your
washing will not dry properly.
Drying has been interrupted as a result of a power cut, because
the condensate container is full or because the maximum drying
time has been exceeded.
Rinse the fluff filters under running water
Insufficient supply of air
Air inlet possibly blocked
Ambient temperature higher than 35 °C
The optimum ambient temperature for drying is between 5 °C
and 35 °C. Outside of this range, the drying time may increase.
Make sure the room is sufficiently ventilated.
Remove laundry from the dryer immediately and spread out. This
allows the heat to dissipate. Be careful as the door, the drum and
the laundry may be hot.
Clean filter and air cooler
Check installation conditions
Switch off, leave to cool down, switch on again, restart
programme.
see the separate Energy-
Page 7.
Page 4.
ensure that air can circulate.
Clear inlet
Page 8.
ventilate the room.
Page 4/6.
Page 8.
10
Advertisement
Table of Contents
