PRINTER 3000 304 995 - 01
2.3.5 THERMISTOR
Preparation:
• Remove the paper exit assembly (* 2.3.2).
PRINTER MODEL-L1
[A]: Thermistor (1 screw)
NOTE: When reassembling, do not
damage the thermistor, and check
that the element touches the hot
roller.
SERVICE MANUAL
2.3.6 HOT ROLLER STRIPPERS
Preparation:
• Remove the paper exit assembly (*
2.3.2).
• Remove the fusing lamp and hot
roller (* 2.3.3).
There are 3 hot roller strippers [A] in the
fusing unit.
[B]: Hot roller stripper (1 spring [B] each)
NOTE: When reassembling, be careful
not to lose the spring [B].
(
G191
TECHNICAL DOCUMENT
)
[A]
[A]
[B]
[A]
2-11
i
G182R023.JPG
G182R022.JPG
G182R021.JPG