D-Link DAP-3320 Quick Install Manual page 11

Wireless poe outdoor access point

Hide thumbs Also See for DAP-3320:

Table of Contents

Configuration

Note: It is recommended to configure your DAP-3320 before mounting. The easiest

way is to connect to the Access Point directly to a computer using an Ethernet cable.

Statically assign the IP address of your computer to 192.168.0.2 with a subnet mask of

255.255.255.0. If you connect the AP to a router (with DHCP enabled), make sure you

are on a 192.168.0.xxx network. By default, the AP will not receive an IP address since it

is statically assigned 192.168.0.50.

Step 1: Open a web browser (e.g., Internet Explorer, Chrome, Firefox , or Safari) and

enter http://192.168.0.50.

Step 2: At the login screen, enter admin for the user name and leave the password

blanks. Click Login to continue.

Step 3: After the home page appears, go to Basic Settings > LAN to change the IP

settings of the DAP-3320. Go to Basic Settings > Wireless to configure your wireless

settings.

Note: Make sure you click on Configuration > Save and Activate to save your settings.

DAP-3320 Install Guide

Table of Contents