D-Link DAP-3320 Quick Install Manual page 10

Connecting to the PoE Injector
1. Connect the Ethernet cable that is connected to the DAP-3320 to
the P+DATA OUT port on the PoE injector.
2. Connect an Ethernet cable to the DATA IN port on the PoE Injector.
Connect the other end of the Ethernet cable to your network
switch or router.
3. Attach the power adapter to the connector labeled POWER IN on
the PoE Injector, and plug it into an electrical outlet.
Power Adapter*
PC
* Power adapter and PoE injector are not included.
10
PoE Injector*
DAP-3320
Switch or
Router
DAP-3320 Install Guide