Communication Parameters For Profinet - Toshiba TOSVERT VF-S15 Manual

4.2. Communication parameters for PROFINET

The following parameters can be used for cyclic transmission of this product.
4.2.1. Relation parameters for VF-S15
Communi
Title
cation No.
c001
C001
c002
C002
c003
C003
c004
C004
c005
C005
c006
C006
c021
C021
c022
C022
c023
C023
c024
C024
c025
C025
c026
C026
(*1): The unit depends on f519 setting
Function
Scanner input 1 address
Scanner input 2 address
Scanner input 3 address
Scanner input 4 address
Scanner input 5 address
Scanner input 6 address
Scanner output 1 address
Scanner output 2 address
Scanner output 3 address
Scanner output 4 address
Scanner output 5 address
Scanner output 6 address
- 21 -
Description
0: -
1: fa06 (Communication command 1)
2: fa23 (Communication command 2)
3: fa07 (Frequency command, 0.01Hz)
5: fa50 (Terminal output data)
6: fa51 (FM analog output)
8: f601 (Stall prevention level, %)
13: acc (Acceleration time 1, 0.1s) (*1)
14: dec (Deceleration time 1, 0.1s) (*1)
15: ul (Upper limit, 0.01Hz)
16: vb (Torque boost value 1, 0.1%)
17: vlv (Base frequency voltage 1, 0.1V)
0-17 (Same as c001)
0-17 (Same as c001)
0-17 (Same as c001)
0-17 (Same as c001)
0-17 (Same as c001)
0: -
1: fd01 (Status information 1)
2: fd00 (Output frequency, 0.01Hz)
3: fd03 (Output current, 0.01%)
4: fd05 (Output voltage, 0.01%)
5: fc91 (Alarm information)
6: fd22 (PID feedback value, 0.01Hz)
7: fd06 (Input terminal status)
8: fd07 (Output terminal status)
9: fe36 (VIB input, 0.01%)
10: fe35 (VIA input, 0.01%)
11: fe37 (VIC input, 0.01%)
12: fd04 (Input voltage (DC detection), 0.01%)
13: fd16 (Estimated speed 0.01Hz)
14: fd18 (Torque, 0.01%)
15: -
16: -
17: -
18: -
19: f880 (Free notes)
20: fd29 (Input power, 0.01kW)
21: fd30 (Output power, 0.01kW)
22: fe14 (Cumulative operation time, 1 hour)
23: fe40 (FM terminal output monitor, 0.01%)
24: -
25: fd20 (Torque current, 0.01%)
26: fd23 (Motor overload factor, 0.01%)
27: fd24 (Drive overload factor, 0.01%)
28: fd25 (PBR overload factor, %)
29: fd26 (Motor load factor, %)
30: fd27 (Drive load factor, %)
31: fe56 (Pulse train input, pps)
32: fe70 (Drive rated current, 0.1A)
33: fe76 (Input Watt-hour, 0.1kWh  10
34: fe77 (Output Watt-hour, 0.1kWh  10
35: fd83 (IGBT temperature, degree C)
0-35 (Same as c021)
0-35 (Same as c021)
0-35 (Same as c021)
0-35 (Same as c021)
0-35 (Same as c021)
E6582051
f749
)
f749
)