Advertisement
Advertisement
Related Manuals for R for Rabbit Jumping Jack
Summary of Contents for R for Rabbit Jumping Jack
- Page 1 R for Rabbit's Jumping Jack Baby Car Seat for Group 1,2 and 3...
- Page 2 NOTICE 1. This is a Universal child restraint; it is approved to Regulation No. 44,04 series of amendments, for general use in vehicles and it will fit most, but not all, car seats. 2. A correct fit is likely if the vehicle manufacturer has declared in the vehicle handbook that the vehicle is capable of accepting a "Universal"...
-
Page 3: Table Of Contents
DIRECTORY 1.WARNING................1-2 2.Getting to know your child seat........3 3.Grouping Instructions............4 4.Usage methods............... 4-5 5.Istallation methods............5-6 6.The adjustment of harness straps and head rest..7 7.Care and Maintenance............8 8.After-Sale Ser vice............... 8 9.Contact us... -
Page 4: Warning
WARNING WARNING This car set is suitalbe for children of 9-36kg(1+2+3group). This child seat can only be installed forward facing using a three-point lap and diagonal seat belt. 3.Do not use this child seat in passenger seats equipped with airbags. 4.Do not use this child seat in the home. -
Page 5: Warning
WARNING WARNING 12.Periodically inspect the harness for wear , paying particular attention to attachmentpoints. stitching and adjusting devices. 13.The rigid items and plastic parts of a child restraint must be so located and installedthat they are not liable , during everyday use of the vehicle to become trapped by a Movable seat or in a door of the vehicle. -
Page 6: Name Of Parts
Know your seat Name of parts headrest headrest cushion belt guide chest pad backrest buckle buckle pad straps group harness straps base There Adjuster connect bar （under the cover） Hardness adjustment straps harness adjuster strap The type of Approved Seat Belt You must have WARNING: THE CAR SEAT SHOULD NOT BE FITTED IN A PASSENGER SEAT OF A CAR THAT HAS AN AIR... -
Page 7: Grouping Instructions
Grouping Instructions/Usage methods The car seat is suitable for children of 9-36kg , 9 months to 12 years old. It has three using status as below according to child's weight. 1) GroupⅠ(9-18kg). The child safety seat with backrest.Using the 3-point adult seat belt of your vehicle to fasten the seat, then fasten your child with the harness belt. -
Page 8: Usage Methods
Usage methods/Istallation methods To lock the crotch strap and shoulder straps: Put the two buckle tongues together and engage in the harness buckle with an audible CLICK. (Pic. 6) Pic. 6 Spin the backrest 180º to separate the seat base and the backrest. The seat base can be installed independently in the car. -
Page 9: Istallation Methods
Istallation methods For Group II (15-25 kg): Remove the backrest from the child car seat and use the booster cushion only. Push the booster cushion firmly against the car seat backrest, pull out the car seat belt, thread the car lap belt under the armrest then across your child's hips, pull the diagonal belt through your child's chest, then pull the lap belt and the diagonal belt together through the other side of the armrest and buckle up. -
Page 10: The Adjustment Of Harness Straps And Head Rest
The adjustment of harness straps and head rest Tightening the harness Pull the shoulder straps upwards to remove the slack from the lap sections of the harness then pull the adjuster strap until the harness is fully tightened. The harness should be adjusted as tightly as possible without causing discomfort to your child.