Show System Standby Manual-Boot - Cisco Nexus 7000 Reference

show system standby manual-boot

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
show system standby manual-boot
To display the status of the system standby manual boot feature, use the show system standby
manual-boot command.
Syntax Description This command has no arguments or keywords.
Defaults
None
Command Modes
Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples
This example shows how to display the status of the system standby manual boot feature:
switch(config)# show system standby manual-boot
system standby manual-boot option is disabled
switch(config)#
Related Commands Command
system hap-reset
Cisco Nexus 7000 Series NX-OS High Availability Command Reference, Release 5.x
HACR-16
show system standby manual-boot
Modification
This command was introduced.
Description
Enables the Supervisor Reset HA policy.
Cisco Nexus 7000 Series NX-OS High Availability Commands
OL-23374-01