Feature Screens; Status Icons - Panasonic VL-MN1000 Installation And Operating Instructions Manual

3. Preparation

3.3 Feature screens

Tapping a feature button in the home screen displays the
corresponding feature screen.
Layout and available features vary depending on the
screen; the following description applies to most
screens.
Example: "Talk" screen
A
B
F
Screen title
Menu
Allows you to select the desired feature or
information. The currently selected item is
highlighted.
Home button
Displays the home screen.
Tabs
Allow you to select the type of information that is
displayed. The currently selected item is highlighted.
Information area
Allow you to select a specific item.
Navigation buttons
Displayed when there are multiple pages of items.
Tap "<" to display the previous page, and ">" display
the next page.
Page indicators
Displayed when there are multiple pages of items.
The current page is highlighted.
Operation buttons
Allow you to perform various operations.
10

3.4 Status icons

Status bar icons
Indicates the room monitor is connected to
the network.
Indicates the room monitor is not connected
to the network. Contact facility staff.
Indicates that the room monitor cannot make
or receive calls. Contact facility staff.
C
Indicates the room monitor is in "do not
disturb" mode.
D
See 8.1 Changing the room monitor's
E
settings (Page 23).
Indicates the room monitor's memory is full.
F
Delete unneeded data, such as unneeded
video or pictures.
G
H
Other status icons
Camera images screen
Displayed in the upper-right corner when
camera images are being recorded.
*1 "Talk", "Message", "Alarm" screens
Displayed when there is new information to
be displayed.
"Talk" screen
Displayed next to new items in the call log.
*1 "Talk" screen
Displayed next to new items in the call log
for which video messages have been
recorded.
"Alarm", "Message" screens
Displayed next to new items in the alarm log
and message list.
*1 "Talk" and "Message" screens
These icons are displayed on the "main" room
monitor only. They are not displayed on a "sub" room
monitor.
"Alarm" screen
This icon is displayed on the room monitor that is
connected to the device that was triggered.