Sensor Search - La Crosse Technology 082616 Instructional Manual

Sensor Search:

Each sensor has a unique ID and will be "parked" to the correct sensor
location on the display until manually deleted.
• If sensor loses connection to the weather station for any reason, the
weather station will show dashes after 30 minutes.
• The weather station will search for 5 minutes every hour to
reconnect with sensor.
1. In normal mode press and release the SENSOR button to view
individual sensor ID's for up to 15 seconds.
2. Press and release the + button to search for the sensor, who's ID
is shown.
TH Sensor ID
3. The strength signal icon will animate until the sensor signal is
received, or for 3 minutes if no signal available.
Delete Sensor:
1. Press the SENSOR button to
view individual sensor ID.
-
2. Hold the button for 5 seconds
to delete the sensor and ID.
Add Sensor:
1. Install batteries in sensor.
2. Press and release the SENSOR
button to view sensor area
(dashes).
3. Press the + button to search. 4.
4. Press the TX button on sensor.
5. When sensor connects, ID and
readings show.
S85807 www.lacrossetechnology.com/S85807
Multi-sensor ID
TH Sensor Deleted
Page | 12