Specifying The Cutting Method For Rolls - Canon iPF670 User Manual

iPF670

Specifying the Cutting Method for Rolls

Specifying the Cutting Method for Rolls

How rolls are cut after ejection varies depending on printer settings.
Automatic The roll is automatically cut by the Cutter Unit follow-
ing printer driver settings.
Choose this setting if you prefer not to have docu-
Eject (wait-
ing for ink to ments dropped immediately after printing, as when
dry after waiting for ink to dry.
To cut the roll with the Cutter Unit, press the Cut but-
printing)
ton.
Manual Choose this setting when using media that cannot be
(when using cut using the Cutter Unit.
Cut each page from the roll using scissors. For con-
media that
cannot be tinuous printing (if you will cut each page later), se-
cut with the lect Automatic Cutting > Yes or select Print Cut
Guideline.
Cutter Unit )
(See "Cutting Roll Paper After Printing.")
Paper cut- Choose this option if you want to cut pages by press-
ing Cutter Unit buttons for manual cutting after print-
ting (to have
ing when Automatic Cutting > No is selected or
the roll cut
at your Print Cut Guideline is selected in the printer driver.
specified Otherwise choose this option if you want to cut the
roll edge after loading a roll.
position)
•
Automatic and Eject are valid only when you have selected Automatic Cutting > Yes in the printer driver.
•
Note
With Eject, printing does not resume after a series of jobs have been printed continuously until the roll is cut.
•
Eject is the preset selection in Cutting Mode for some types of paper. For this paper, we recommend keeping the
preset cutting mode.
Cut rolls manually in the following cases:
Eject (waiting for ink to dry after printing)
•
When cutting wide printed documents after ejection, have two people support the documents. If the paper drops, prin-
ted documents may be damaged.
Important
•
Do not lift the paper when holding printed documents before cutting. If the paper rises, it may affect the printing quali-
ty or cause rough cut edges.
User's Guide
Cutting Method
➔
Printer Setting
Media Automatic
Menu > Pa-
per Details
Eject
> (Various
Types of
Paper) >
Cutting
Mode
Manual
P.150
Cut button Yes
pressed
Specifying the Cutting Method for Rolls
Driver Setting
Automatic Yes
Cutting
Yes
No, Yes, Print
Cut Guideline
No, Print Cut
Guideline
369