Option
Description
•
Boot Sequence
Boot Sequence
Boot List Options
Advanced Boot
This option allows you the legacy option ROMs to load. By default, the Enable Legacy Option ROMs is disabled.
Options
Date/Time
Allows you to change the date and time.
System Configuration screen options
Option
Description
Integrated NIC
Allows you to configure the integrated network controller. The options are:
•
•
•
SATA Operation
Allows you to configure the internal SATA hard-drive controller. The options are:
•
•
Drives
Allows you to configure the SATA drives on board. All drives are enabled by default. The options are:
•
•
•
SMART Reporting
This field controls whether hard drive errors for integrated drives are reported during system startup. This
technology is part of the SMART (Self-Monitoring Analysis and Reporting Technology) specification. This option is
disabled by default.
•
USB Configuration
This field configures the integrated USB controller. If Boot Support is enabled, the system is allowed to boot any
type of USB Mass Storage Devices (HDD, memory key, floppy).
Device Information: Displays Primary Hard Drive, SATA-0, M.2PCIe SSD-0, Dock eSATA Device, LOM MAC
Address, Video Controller, Video BIOS Version, Video Memory, Panel Type, Native Resolution, Audio
Controller, WiFi Device, WiGig Device, Cellular Device, Bluetooth Device.
Allows you to change the order in which the computer attempts to find an operating
system. The options are:
•
Windows Boot Manager
By default, all the options are checked. You can also deselect any option or change the
boot order.
Allows you to change the boot list option:
•
Legacy
•
UEFI
Disabled
Enabled
Enabled w/PXE: This option is enabled by default.
Disabled
AHCI
: This option is enabled by default.
SATA-0
SATA-1
SATA-2
Enable SMART Reporting
System Setup overview
45