WLAN card
Removing the WLAN card
1
Follow the procedure in
2
Remove the:
a
cover
b
bezel
c
cooling shroud
d
hard drive assembly
e
optical drive
3
Perform the following steps to remove the WLAN card from the computer:
a
Remove the M2L3.5 screw to release the plastic tab that secures the WLAN card to the computer [1, 2].
b Disconnect the WLAN cables from the connectors on the WLAN card [3].
c
Remove the WLAN card from its connector on the system board [4].
Installing the WLAN card
1
Insert the WLAN card to the connector on the system board.
2
Connect the WLAN cables to the connectors on the WLAN card.
3
Place the plastic tab and tighten the M2L3.5 screw to secure the WLAN card to the system board.
4
Install:
a
optical drive
Before working inside your
computer.
Removing and installing components
15