Table 2. Navigation Keys(continued)
Keys
Navigation
<F1>
Displays the System Setup help file.
System setup options
NOTE:
Depending on the computer and its installed devices, the items listed in this section may or may not appear.
General screen options
This section lists the primary hardware features of your computer.
Option
Description
System
•
Information
•
•
•
Boot Sequence
Boot Sequence
UEFI Boot Path
This options control whether or not the system will prompt the user to enter the Admin password (if set) when
Security
booting a UEFI boot path from the F12 Boot Menu
•
•
•
Date/Time
Allows you to change the date and time.
System Configuration screen options
Option
Description
Integrated NIC
Allows you to configure the integrated network controller. The options are:
•
•
•
SATA Operation
Allows you to configure the internal SATA hard-drive controller. The options are:
•
•
•
Drives
Allows you to configure the SATA drives on board. All drives are enabled by default. The options are:
56
System setup
System Information: Displays BIOS Version, Service Tag, Asset Tag, Ownership Tag, Ownership Date,
Manufacture Date, and the Express Service Code.
Memory Information: Displays Memory Installed, Memory Available, Memory Speed, Memory Channels Mode,
Memory Technology, DIMM A1 Size, DIMM B 2Size.
Processor Information: Displays Processor Type, Core Count, Processor ID, Current Clock Speed, Minimum
Clock Speed, Maximum Clock Speed, Processor L2 Cache, Processor L3 Cache, HT Capable, and 64-Bit
technology.
Device Information: Displays Primary Hard Drive, SATA-0SATA-0, SATA-1, SATA-2, SATA-3, LOM MAC
Address, Video Controller, Audio Controller. WiFi Device, M.2PCIe SSD-0, Bluetooth Device.
Allows you to change the order in which the computer attempts to find an operating
system. The options are:
•
Windows Boot Manager
•
Onboard NIC(IPV4)
•
Oboard NIC(IPV6)
By default, all the options are checked. You can also deselect any option or change the
boot order.
Always Except Internal HDD (default)
Always
Never
Disabled
Enabled
Enabled w/PXE: This option is enabled by default.
Disabled
AHCI
RAID On(default)