Adjusting Brightness In Windows 10; Cleaning The Display; Using Touch Screen In Windows 10; Connecting To External Display Devices - Dell Latitude 5580 Owner's Manual

Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: info@andpro.ru
GUID-CC593559-34AE-4428-87C1-FE37520CEFB4

Adjusting brightness in Windows 10

To enable or disable automatic screen brightness adjustment:
1 Swipe-in from the right edge of the display to access the Action Center.
2 Tap or click All Settings
3 Use the Adjust my screen brightness automatically slider to enable or disable automatic-brightness adjustment.
NOTE: You can also use the Brightness level slider to adjust the brightness manually.
GUID-8C9E010E-E023-4B78-A8BF-B111C75934F1

Cleaning the display

1 Check for any smudges or areas that has to be cleaned.
2 Use a microfiber cloth to remove any obvious dust and gently brush off any dirt particles.
3 Proper cleaning kits should be used to clean and keep your display in a crisp clear pristine condition.
NOTE: Never spray any cleaning solutions directly on the screen; spray it to the cleaning cloth.
4 Gently wipe the screen in a circular motion. Do not press hard on the cloth.
NOTE: Do not press hard or touch the screen with your fingers or you may leave oily prints and smears.
NOTE: Do not leave any liquid on the screen.
5 Remove all excess moisture as it may damage your screen.
6 Let the display dry thoroughly before you turn it on.
7 For stains that are hard to remove, repeat this procedure till the display is clean.
GUID-B5F217A0-6DB8-4062-9E92-5CB632B0CEDA

Using touch screen in Windows 10

Follow these steps to enable or disable the touch screen:
1 Go to the Charms Bar and tap All Settings
2 Tap Control Panel.
3 Tap Pen and Input Devices in the Control Panel.
4 Tap the Touch tab.
5 Select Use your finger as an input device to enable the touch screen. Clear the box to disable the touch screen.
GUID-2F93D713-4966-4E3A-A6AC-8A29B00CF308

Connecting to external display devices

Follow these steps to connect your laptop to an external display device:
1 Ensure that the projector is turned on and plug the projector cable into a video port on your laptop.
2 Press the Windows logo+P key.
66 Technology and components
При обращении используйте промокод AND-PDF и получите скидку.
> System > Display.
.