Table of Contents
Advertisement
About Wi-Fi
Using the Wi-Fi function, you can connect to
an access point for your home, company
network or public wireless LAN services to
use mail and Internet.
･ Even when Wi-Fi is on, packet
communication is available. However, while
you connect Wi-Fi network, Wi-Fi comes
first.
･ When a Wi-Fi network is disconnected,
connection is automatically switched to a
3G/GPRS network. Note that packet
communication fee applies for using 3G/
GPRS network.
･ Turn the Wi-Fi function to off when you do not
use Wi-Fi to cut battery power consumption.
Before using Wi-Fi
To use Wi-Fi, turn on Wi-Fi and search
available Wi-Fi network, then connect it.
･ To access the Internet using Wi-Fi, connect
to Wi-Fi network in advance.
❖
Information
･ Make sure to receive enough signal strength for
using Wi-Fi. The signal strength of the Wi-Fi
network varies by the location of the FOMA
terminal. Moving closer to the Wi-Fi router might
enhance the signal strength.
■
Reception interference caused by
Bluetooth devices
Bluetooth devices and wireless LAN
devices use the same frequency band
(2.4GHz). If you use Bluetooth devices
near a wireless LAN device, reception
interference may occur or the
communications speed may lower. Also,
you may hear noise or have a connection
problem. Communication may be
interrupted or sound may be lost while
streaming data, etc. In these cases, do
the following:
･ Keep the terminal and Bluetooth device
to be connected wirelessly over 10
meters away from a wireless LAN
device.
･ Within 10 meters, turn off the Bluetooth
device to be connected.
Turning on Wi-Fi
1
From the Settings screen (P.91),
tap [Wireless & networks].
2
Mark [Wi-Fi] checkbox.
･ The FOMA terminal scans for
available Wi-Fi networks.
❖
Information
･ It may take a few seconds before the Wi-Fi
connection is on.
Settings
94
Advertisement
Table of Contents
