Table of Contents
Advertisement
■
Dynamic key resizing with highlight
Widen the key that is predicted for the
next entry much further and highlight it.
■
Off
Display equally the width of each key.
Entering characters on the
Japanese syllabary keyboard
You can use the software keys arranged
according to the Japanese syllabary to enter
Japanese characters in "Kana input" mode.
The main functions of the touch-
keys
･ To change character modes and other input
operations, tap the following icons on the
Japanese syllabary keyboard.
Icon
Each time you tap, the character
/
mode switches "Hiragana/Kanji" →
"Alphanumeric" in order and a status
icon,
the status bar.
Display a pop-up window.
/
/
: Keyboard switch
Touch and
(two-byte)/
hold
Character mode switch
: Display the setting screen for
Japanese keyboard.
: Display plug-in applications list.
Tap to switch upper/lower case or add
voiced sound.
Tap to display one-byte symbols/two-
byte symbols list and enter them.
Switch the tab to display smileys list
and enter them. (When entering sp-
mode mail, pictogram tab appears.)
A list of plug-in applications appears
and you can activate the plug-in
Touch and
application.
hold
Move the cursor*
Touch and hold to move continuously.
Or change the range for conversion.
Move the cursor*
Touch and hold to move continuously.
Or change the range for conversion.
When there is an unfixed character
string with the cursor at the right end,
tap to enter the same character as the
one at the end.
Before Using the Handset
Function
→
/
/
appears in
(one-byte):
1
to the left.
1
to the right.
Continued on next page
62
Advertisement
Table of Contents
