Samsung VP-D361i Service Manual page 170

Operating Instructions
Initial Setting : System Menu Setting
Selecting the OSD Language (Language)
✤ The Language function works in <Camera>/<Player>/<M.Cam>/<M.Player> modes. ➥page 19
✤ You can select the desired language to display the menu screen and the messages.
1. Set the [Power] switch to [CAMERA] or [PLAYER].
2. Set the [Mode] switch to [TAPE] or [MEMORY]. (VP-D363(i)/D364W(i)/D365W(i) only)
3. Press the [MENU] button.
■ The menu list will appear.
4. Move the [Zoom] lever up or down to select <System>, then press the [OK] button.
5. Move the [Zoom] lever up or down to select <Language>, then press the [OK]
button.
■ The available language options are listed.
6. Move the [Zoom] lever up or down to select desired OSD language, then press the [OK]
button.
■ The OSD language is refreshed in selected language.
7. To exit, press the [MENU] button.
[ Note ]
The word <Language> in the menu is always indicated in English.
ENGLISH
Initial Setting : System Menu Setting
Viewing the Demonstration (Demonstration)
✤ The Demonstration function may only be used in the <Camera> mode without a tape
inserted in the Camcorder. ➥page 19
✤ Before you begin: Make Sure that there is no tape inserted in the Camcorder. ➥page 32
✤ Demonstration automatically shows you the major functions that are included with your
Camcorder so that you may use them more easily.
✤ The Demonstration operates repeatedly until the Demonstration mode switched Off.
1. Set the [Power] switch to [CAMERA].
2. Set the [Mode] switch to [TAPE]. (VP-D363(i)/D364W(i)/D365W(i) only)
3. Press the [MENU] button.
■ The menu list will appear.
4. Move the [Zoom] lever up or down to select <System>, then press the [OK] button.
5. Move the [Zoom] lever up or down to select <Demonstration>, then press the [OK]
button.
6. Move the [Zoom] lever up or down to select <On>, then press the [OK] button.
7. Press the [MENU] button.
■ The Demonstration will begin.
8. To quit the Demonstration, press the [MENU] button.
[ Notes ]
■ The Demonstration function is automatically activated when the Camcorder is left idle for
more than 10 minutes after switching to the <Camera> mode (no tape is inserted in the
Camcorder).
■ If you press other buttons (FADE, MF/AF, PHOTO, EASY.Q) during the Demonstration
mode, the demonstration stops temporarily and resumes 10 minutes later if you do not
operate any other functions.
28 28
11-10
ENGLISH
1
4
Camera Mode
√System
Clock Set
√On
Remote
√On
Beep Sound
√English
Language
√On
Demonstration
ZOOM Move OK Select MENU Exit
27 27
1
4
Camera Mode
√System
Clock Set
√On
Remote
√On
Beep Sound
√English
Language
√On
Demonstration
ZOOM Move OK Select MENU Exit
6
Camera Mode
Back
Clock Set
Remote
Beep Sound
Language
Demonstration Off
On
ZOOM OK MENU
Move Select Exit
7
SAMSUNG Camcorder is...
Demonstration
Samsung Electronics