Samsung VP-D361i Service Manual page 168

Operating Instructions
Initial Setting : System Menu Setting
Setting the Clock (Clock Set)
✤ Clock setup works in <Camera>/<Player>/<M.Cam>/<M.Player> modes. ➥page 19
✤ The Date/Time is automatically recorded onto a tape. Before recording, please set the <Date/Time>. ➥page 30
1. Set the [Power] switch to [CAMERA] or [PLAYER].
2. Set the [Mode] switch to [TAPE] or [MEMORY].
(VP-D363(i)/D364W(i)/D365W(i) only)
3. Press the [MENU] button.
■ The menu list will appear.
4. Move the [Zoom] lever up or down to select <System>, then press the [OK] button.
5. Move the [Zoom] lever up or down to select <Clock Set>, then press the [OK] button.
■ The year will highlight first.
6. Move the [Zoom] lever up or down to set current Year, then press the [OK] button.
■ The month will be highlighted.
7. You can set the month, day, hour and minute following the same procedure
after setting the year.
8. Press the [OK] button after setting the minutes.
■
A message <Complete !> is displayed.
■ To adjust the clock, select the Year, Month, Day, Hour or Min by pressing the [OK]
button, then move the [Zoom] lever to the up or down to set respective values.
9. To exit, press the [MENU] button.
[ Notes ]
■
After the Lithium Battery loses its charge (after about 6 months), the date/time appears
on the screen as <00:00 1.JAN.2006>.
■ You can set the year up to 2037.
■ If the Lithium Battery is not installed, any input data will not be backed up.
ENGLISH
Initial Setting : System Menu Setting
Setting the Wireless Remote Control Acceptance (Remote) (VP-D363(i)/D364W(i)/D365W(i) only)
✤ The Remote function works in <Camera>/<Player>/<M.Cam>/<M.Player> modes. ➥page 19
✤ The Remote function allows you to enable or disable the remote control for use with the Camcorder.
1. Set the [Power] switch to [CAMERA] or [PLAYER].
2. Set the [Mode] switch to [TAPE] or [MEMORY].
3. Press the [MENU] button.
■
The menu list will appear.
4. Move the [Zoom] lever up or down to select <System>, then press the [OK] button.
5. Move the [Zoom] lever up or down to select <Remote>, then press the [OK] button.
6. Move the [Zoom] lever up or down to select <On> or <Off>, then press the [OK] button.
7. To exit, press the [MENU] button.
[ Note ]
If you set the <Remote> to <Off> in the menu and try to use it, the remote control icon
( ) will blink for 3 seconds on the LCD Screen and then disappear.
24 24
11-8
ENGLISH
4
Camera Mode
√System
Clock Set
√On
Remote
√On
Beep Sound
√English
Language
√On
Demonstration
ZOOM Move OK Select MENU Exit
5
Camera Mode
Back
...
Clock Set
1 JAN 2006
Remote
†
Beep Sound 00 : 00
Language
Demonstration
ZOOM Adjust OK Select MENU Exit
8
Camera Mode
Back
Clock Set
1 JAN 2006
Remote
Beep Sound 00 : 00
Language
Complete !
Demonstration
ZOOM Move OK Select MENU Exit
23 23
1
4
Camera Mode
√System
Clock Set
√On
Remote
√On
Beep Sound
√English
Language
√On
Demonstration
ZOOM Move OK Select MENU Exit
6
Camera Mode
Back
Clock Set
Remote Off
Beep Sound On
Language
Demonstration
ZOOM Move OK Select MENU Exit
Samsung Electronics