Adding Memory - Panasonic CF-45 Series Reference Manual

Adding Memory

RAM Module
Lever
Cover
Hard Disk Drive
Finger location
RAM Module Slot
RAM Module
Take care not to remove
the connector
CAUTION
Use a RAM module meeting the RAM module specifications below. If a module is used
that does not meet the specifications, there are cases in which data may become unusable
or the computer may not operate properly.
RAM modules are extremely sensitive to static electricity. There are cases where static
electricity generated by the human body has adversely affected such modules. In addition,
it is easy to damage the RAM modules or internal components of the computer. There-
fore, when installing or removing a RAM module, handle the module with extreme care.
Installing/Removing the RAM Module
1
Power off your computer
Do not shut down using the suspend or hibernation mode.
CAUTION
Do not install or remove peripherals while your computer is in the suspend or
hibernation mode; The RAM module may become damaged.
2
Remove the cover
Turn the computer over, unlock the lever and then slide the cover off.
CAUTION
Do not touch the terminals or internal components, insert objects other than the
module, or allow foreign particles to enter. Doing so has been known to cause
damage, fire or electric shock.
3
Flip over the hard disk
Do not disconnect the hard disk from the connector, and let it remain on the frame.
(Support the hard disk by hand.)
CAUTION
Be careful when handling the hard disk. The hard disk is extremely sensitive to
shock.
4
Installing the RAM module
Slide in the module at an angle and snap the module into place by pushing down on
it.
RAM module specifications
144 pins, SO-DIMM, 3.3 V, SDRAM
Removing the RAM module
Hook
Open the left and right hooks.
1
Gently remove the RAM module from the slot.
2
5
Gently return the hard disk into the slot, and then slide the
cover back on
Be sure to lock the lever.
page 25, Step 4 and 5 )
(
( )
18