Adding Memory - Panasonic CF-71 Reference Manual

Adding Memory

RAM Module
Cover
2
RAM Module Slot
2
RAM Module
Hooks
2
2
CAUTION
Use a RAM module meeting the RAM module specifications below. If a module is
used that does not meet the specifications, there are cases in which data may
become unusable or the computer may not operate properly.
RAM modules are extremely sensitive to static electricity. There are cases where
static electricity generated by the human body has adversely affected such mod-
ules. In addition, it is easy to damage the RAM modules or internal components
of the computer. Therefore, when installing or removing a RAM module, handle
the module with extreme care.
Installing/Removing the RAM Module
1
Power off your computer
Do not shut down using the suspend* or hibernation mode.
2
Remove the memory cover after removing the screw
holding it in place
Turn the computer over and use a screwdriver to remove the screw.
CAUTION
Do not touch the terminals or internal components, insert objects
other than the module, or allow foreign particles to enter. Doing so
has been known to cause damage, fire or electric shock.
3
Installing the RAM module
Slide in the module at an angle.
Snap the module into place by pushing down on it.
2
144 pins, SO-DIMM, 3.3 V, SDRAM, PC100 Compliant
Removing the RAM module
Open the left and right hooks.
Gently remove the RAM module from the slot.
2
4
Put the cover back into place, then fasten the screw
( "Starting Up/Shutting Down")
* With Windows 2000, the "Suspend" is called "Standby".
RAM module specifications
23