Table of Contents
Advertisement
EM3-31005
5. NOTES
BEFORE STARTING
PROGRAMMING
1) Be sure to plug the power plug into an AC outlet.
2) Turn the control lock to "PROGCMT"
position, and the scale will be placed in programming
mode.
5.1 Installing PC Keyboard
If you set the data with PC keyboard,
connect the PC keyboard
plug
to
the PC
keyboard
connector.
Then check whether the keys on the PC keyboard can enter information
properly or not.
NOTE:
The PC keyboard
has its own particular
baud rate.
During the initial settings,
therefore,
make sure to set the SL-5900 baud rate to match the keyboard's
baud rate.
5.2 Installing RK-3 Keyboard
If you set the data with RK-3 keyboard,
prepare
the Programming
Keyboard
Adapter
OP-57-RK-3
(option) and Programming
Keyboard RK-3 (option).
1) Connect the plug of the OP-57-RK-3 to the PC
keyboard
connector.
2) Connect the RK-3 keyboard connector
to the OP-57-RK-3
connector.
3) Attach the key-sheet
OP-57-RK-KS
(accessory of OP-57-RK-3)
to the RK-3 keyboard.
4) Check whether the keys on the RK-3 keyboard can enter information
properly or not.
-6-
Advertisement
Table of Contents
