Table of Contents
Advertisement
When connecting to a standard 4:3 screen TV
Depending on the disc, the image may not fit your TV screen. If you want to change the aspect
ratio, please refer to page 64.
Notes
Do not connect a VCR, etc. between your TV and the player. If you pass the player signals via the VCR,
you may not receive a clear image on the TV screen. If your TV has only one audio/video input jack,
connect the player to this jack.
CD/DVD player
When you connect the player to your TV via the SCART (EURO AV) jacks, the TV s input source is set
to the player automatically when you start playback. In this case, press t (TV/video) on the remote to
return the input to the TV.
When you play a disc recorded in the NTSC colour system, the player outputs the video
signal or the Setup Display etc. in the NTSC colour system and the picture may not appear
on the PAL colour system televisions. In this case, open the tray and remove the disc.
18
Connecting toyour TV
A
This connection will use your TV speakers for sound. If you use the SCART (EURO AV) cord
in pattern B of
Step
3: Connecting the Video Cords (page 16), you do not have to connect
audio cords to your TV.
CD/DVD player
DIGITAL OUT
LINE OUT
S VIDEO
COMPONENT VIDEO OUT
OUT
PCM/DTS/MPEG/
DOLBY DIGITAL
COAXIAL
OPTICAL
R-AUDIO-L
VIDEO
Y
A
LINE OUT
(yellow)*
(white)
R-AUDIO-L
VIDEO
(red)
to LINE OUT
Audio/video
L/R (AUDIO)
cord (supplied)
l : Signal flow
* The yellow plug is used for video signals
(page 16).
z Hint
When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the
LINE OUT L/R (AUDIO) jacks to the TV s audio
input jack.
20
VCR
TV
Connect
directly
LINE (RGB) -TV
C
B
C
R
TV
(yellow)*
(white)
(red)
to audio input
Step 4: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections,
Components to be connected
TV
Surround effects: TVS DYNAMIC (page 50),
TVS WIDE (page 50)
Stereo amplifier (receiver) and two speakers
Surround effects: TVS STANDARD (page 50)
or
MD deck/DAT deck
Surround effects: None
AV amplifier (receiver) having a Dolby*
Surround (Pro Logic) decoder and 3 to 6
speakers
Surround effects: Dolby Surround (Pro Logic)
(page 71)
AV amplifier (receiver) with digital input jacks
having a Dolby Digital, DTS**, or MPEG audio
decoder and 6 speakers
Surround effects:
Dolby Digital (5.1ch) (page 71)
DTS (5.1ch) (page 71)
MPEG audio (5.1 ch) (page 71)
* Manufactured under license from Dolby
Laboratories. Dolby,
Pro Logic, and the
double-D symbol are trademarks of Dolby
Laboratories.
**
DTS
and
DTS Digital Out
are trademarks
of Digital Theater Systems, Inc.
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
B
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
CD/DVD player
DIGITAL OUT
LINE OUT
PCM/DTS/MPEG/
DOLBY DIGITAL
COAXIAL
OPTICAL
R-AUDIO-L
B-2
Coaxial digital
cord (not supplied)
DIGITAL OUT
PCM/DTS/MPEG/
DOLBYDIGITAL
COAXIAL
OPTICAL
to DIGITAL OUT
(COAXIAL or OPTICA
Optical digital cord
(not supplied)
Remove jack cap
before connecting
to coaxial or optical digital
input
[Speakers]
Stereo amplifier (receiver)
Front (L)
Front (R)
l: Signal flow
1-4
through
.
A
D
Connection
Your setup (example)
(page 20)
A
B
(page 21)
(page 22)
C
(page 23)
D
B-1
. If the amplifier
S VIDEO
COMPONENT VIDEO OUT
LINE (RGB) -TV
OUT
VIDEO
Y
C
B
C
R
Stereo audio cord
LINE OUT
(not supplied)
(white)
or
or
(red)
R-AUDIO-L
to LINE OUT L/R (AUDIO)
L)
(white)
(red)
to audio input
MD deck/DAT deck
19
, continued
.
B-2
B-1
VIDEO
, continued
21
Advertisement
Table of Contents
