Table of Contents
Advertisement
Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro
C
Logic) decoder and 3 to 6 speakers
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use
(receiver) has a digital input jack, use
C-2
CD/DVD player
DIGITAL OUT
S VIDEO
COMPONENT VIDEO OUT
LINE OUT
OUT
PCM/DTS/MPEG/
DOLBY DIGITAL
COAXIAL
OPTICAL
R-AUDIO-L
VIDEO
Y
C
B
C-2
Coaxial digital cord
(not supplied)
DIGITAL OUT
PCM/DTS/MPEG/
DOLBY DIGITAL
or
or
COAXIAL
OPTICAL
to DIGITAL OUT
(COAXIAL or OPTICA
Optical digital cord
(not supplied)
Remove jack cap
before connecting
to coaxial or optical digital
input
[Speakers]
Amplifier (receiver) with Dolby
Surround decoder
Rear (L)
Rear (R)
Subwoofer
Centre
l: Signal flow
Note
When connecting 6 speakers, replace the monaural
rear speaker with a centre speaker, 2 rear speakers
and a subwoofer.
22
Step 5: Connecting the Mains Lead
Plug the player and TV mains lead (power cord) into a mains.
Step 6: Quick Setup
Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press >. To return to the previous adjustment, press ..
ENTER
1
Turn on the TV.
2
Press [/1.
3
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
Press [ENTER] to run QUICK SETUP
appears at the bottom of the screen. If this
message does not appear, select
QUICK
under SETUP in the Control
Menu to run Quick Setup (page 63).
24
C-1
. If your amplifier
.
LINE (RGB) -TV
C
R
C-1
Stereo
audio cord (not
LINE OUT
(white)
supplied)
R-AUDIO-L
VIDEO
(red)
to LINE OUT L/R (AUDIO)
L)
(white)
(red)
to audio input
[Speakers]
Front (L)
Front (R)
Rear (mono)
4
Press ENTER without inserting a
disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
The available languages differ depending
upon the player model.
LANGUAGE SETUP
OSD:
ENGLISH
MENU:
ENGLISH
AUDIO:
FRAN AIS
SUBTITLE:
DEUTSCH
ITALIANO
ESPA OL
NEDERLANDS
DANSK
SVENSKA
5
Press X/x to select a language.
The player uses the language selected
here to display the menu and subtitles as
well.
6
Press ENTER.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
SCREEN SETUP
16:9
TV TYPE:
SCREEN SAVER:
16:9
BACKGROUND:
4:3 LETTER BOX
LINE:
4:3 PAN SCAN
7
Press X/x to select the setting that
matches your TV type.
◆ If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
¥ 16:9 (page 64)
Connecting to an AV amplifier (receiver) with a digital input jack having
D
a Dolby Digital, MPEG audio or DTS decoder and 6 speakers
This connection will allow you to use the Dolby Digital, MPEG audio, or DTS decoder function
of your AV amplifier (receiver).
CD/DVD player
DIGITAL OUT
LINE OUT
S VIDEO
OUT
PCM/DTS/MPEG/
DOLBY DIGITAL
COAXIAL
OPTICAL
R-AUDIO-L
VIDEO
to DIGITAL OUT
(COAXIAL or OPTICAL)
Coaxial digital cord
(not supplied)
to coaxial digital input
[Speakers]
Rear (L)
Subwoofer
Rear (R)
l: Signal flow
z Hint
Use connection
when connecting to 7 or
D
more speakers (6.1 ch or more).
◆ If you have a 4:3 standard TV
4:3 LETTER BOX or 4:3 PAN SCAN
(page 64)
8
Press ENTER.
The Setup Display for selecting the type
of video signal output from the LINE
(RGB)-TV jack appears.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
JACKET PICTURE
LINE:
S VIDEO
9
Press X/x to select the type of
signal you want to output from the
LINE (RGB)-TV jack.
RGB,
If you set LINE to
does not output component video signals
from COMPONENT VIDEO OUT jacks.
◆ Video signals
VIDEO (page 64)
◆ S video signals
S VIDEO (page 64)
◆ RGB signals
RGB (page 64)
10
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.
Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.
YES
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
NO
11
Press X/x to select the type of
jack (if any) you are using to
connect to an amplifier (receiver),
then press ENTER.
Choose the item that matches the audio
connection you selected on pages 20 to
23 (
through
).
A
D
1-5
COMPONENT VIDEO OUT
LINE (RGB) -TV
Y
C
B
C
R
D
DIGITAL OUT
PCM/DTS/MPEG/
DOLBY DIGITAL
COAXIAL
OPTICAL
or
Optical digital cord
(not supplied)
Remove jack cap
before connecting
to optical digital input
[Speakers]
AV amplifier (receiver) having
a decoder
Front (L)
Front (R)
Note
After you have completed the connection, be sure to
set
DOLBY DIGITAL
to
DOLBY DIGITAL
and DTS to ON in Quick Setup (page 24). If
your AV amplifier (receiver) has an MPEG audio
decoder function, set MPEG to MPEG
(page 67). Otherwise, no sound or a loud noise will
come from the speakers.
A
If you connect just a TV and nothing
else, select NO. Quick Setup is
finished and connections are complete.
B-1
C-1
Select LINE OUTPUT L/R
(AUDIO). Quick Setup is finished and
connections are complete.
16:9
B-2
C-2
D
ON
Select DIGITAL OUTPUT. The
Setup Display for DOLBY DIGITAL
VIDEO
VIDEO
appears.
RGB
12
Press X/x to select the type of
Dolby Digital signal you wish to
send to your amplifier (receiver).
Choose the signal that matches the audio
connection you selected on pages 21 to
23 (
through
).
B
D
the player
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
STANDARD
DOWNMIX:
DOLBY SURROUND
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
DTS:
DOLBY DIGITAL
B-2
C-2
D-PCM (page 67)
D
DOLBY DIGITAL (only if the
amplifier (receiver) has a Dolby Digital
decoder) (page 67)
13
Press ENTER.
DTS is selected.
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
STANDARD
DOWNMIX:
DOLBY SURROUND
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
DTS:
Centre
, continued
23
OFF
ON
D-PCM
D-PCM
OFF
ON
D-PCM
PCM
OFF
OFF
ON
25
, continued
Advertisement
Table of Contents
