Usb 2.0 Header (Usb_2_3) - ASROCK Z170M-PIO2 Manual

Chassis Intrusion and
Speaker Header
(7-pin SPK_CI1)
(see p.1, No. 11)
Serial ATA3 Connectors
(SATA3_1: see p.1, No. 9)
(SATA3_2: see p.1, No. 8)
(SATA3_3: see p.1, No. 7)
(SATA3_4: see p.1, No. 6)
USB 2.0 Headers
(9-pin USB_2_3)
(see p.1, No. 16)
(9-pin USB_4_5)
(see p.1, No. 12)
USB 3.0 Header
(19-pin USB3_3_4)
(see p.1, No. 14)
SPEAKER
DUMMY
DUMMY
+5V
1
SIGNAL
GND
DUMMY
1
USB_PWR USB_PWR
P- P-
P+ P+
GND GND
DUMMY
USB_PWR
P-
P+
GND
DUMMY
1
GND
P+
P-
USB_PWR
Vbus Vbus
Vbus IntA_PB_SSRX-
IntA_PA_SSRX- IntA_PB_SSRX+
IntA_PA_SSRX+ GND
IntA_PB_SSTX-
GND
IntA_PA_SSTX-
IntA_PB_SSTX+
IntA_PA_SSTX+
GND
GND IntA_PB_D-
IntA_PA_D- IntA_PB_D+
IntA_PA_D+ Dummy
1
Please connect the
chassis intrusion and the
chassis speaker to this
header.
These four SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
There are two headers
on this motherboard.
Each USB 2.0 header can
support two ports.
Besides two USB 3.0 ports
on the I/O panel, there
is one header on this
motherboard. Each USB
3.0 header can support
two ports.
Z170M-PIO2
11