Table of Contents
Advertisement
D-1
MAINTENANCE
SAFETY PRECAUTIONS
WARNING
ELECTRIC SHOCK can kill.
• Do not operate with covers
removed.
• Turn off power source before
installing or servicing.
• Do not touch electrically hot
parts.
• Turn the input power to the welding power
source off at the fuse box before working in the
terminal strip.
• Only qualified personnel should install, use or
service this equipment.
ROUTINE MAINTENANCE
Routine maintenance consists of periodically blowing
out the machine, using a low pressure airstream, to
remove accumulated dust and dirt from inside the
feeder. Check weld cables, control cables and gas
hoses for cuts.
PERIODIC MAINTENANCE
• Replace the drive rolls and inner wire guide when
they are worn.
• Blow out or vacuum the inside of the feeder.
ACTIV8™
D-1
Hide quick links:
Advertisement
Table of Contents
