Attaching Media; Connecting The Fiber Optic Cable - HP StoreFabric CN1100R User Manual

Remove the standard profile bracket, and then store it for future use.
4.
Align the new mounting bracket tabs with the holes in the CNA.
5.
IMPORTANT: Do not push the bracket past the grounding tabs on the transceiver housing.
Be sure the LEDs are properly aligned with the holes in the bracket.
Install the screws that attach the CNA to the bracket.
6.

Attaching media

Connect the CNA with either removable SFP optical transceivers or copper interface cables.

Connecting the fiber optic cable

Insert the transceiver into the cage. Be sure that the tab on the plug clicks into position.
1.
Connect one end of the fiber optic cable to the LC connector on the CNA.
2.
Connect the other end of the cable to the converged network switch.
3.
Installing an adapter 9