HP A7500 Series Command Reference Manual page 29

A : Authentication use AAA.
L : Authentication use local database.
N : Current UI need not authentication.
P : Authentication use current UI's password.
Table 1 Output description
Field Description
+ The current user interface is active.
F The current user interface is active and works in asynchronous mode.
Idx Absolute number of the user interface.
Type Type and relative number of the user interface.
Tx/Rx Transmission/Receive rate of the user interface
Whether the modem is allowed to dial in (in), dial out (out), or both (inout)
Modem
By default, the character - is displayed to indicate that this function is disabled.
Privi Indicates the command level of a user under that user interface
Auth Authentication mode for the users, which can be A, P, L, and N.
The physical port that corresponds to the user interface. (For AUX and VTY user interfaces,
Int
- is displayed.)
A AAA authentication
L Local authentication (not supported)
N No authentication
P Password authentication
# Display summary about all user interfaces.
<Sysname> display user-interface summary
User interface type : [AUX]
0:UX
User interface type : [VTY]
18:UXXX XXXX XXXX XXXX
2 character mode users.
16 UI never used.
2 total UI in use
Table 2 Output description
Field
User interface type
0:X
character mode users.
UI never used.
(U)
(X)
Description
Type of user interface (AUX/VTY)
0 represents the absolute number of the user interface. X means this
user interface is not used; U means this user interface is in use.
(U) Number of users, or, the total number of character U.
Number of user interfaces not used, or, the total number of
(X)
character X.
22