HP A7500 Series Command Reference Manual page 113

|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display saved-configuration command to display the contents of the saved startup configuration
file.
During device management and maintenance, you can use this command to verify that important
configurations are saved to the startup configuration file.
If the system is not specified with a startup configuration file or the specified configuration file does not
exist, the display saved-configuration command displays the default configuration file of the device.
If the default configuration file does not exist, the system prompts "The config file does not exist!".
Related commands: display current-configuration, reset saved-configuration, and save.
Examples
# Display the startup configuration file of the device (the output information depends on the current
configuration).
<Sysname> display saved-configuration
#
version 5.20, Test 5310
#
sysname Sysname
#
domain default enable system
#
telnet server enable
#
multicast routing-enable
#
vlan 1
#
vlan 999
#
domain system
access-limit disable
state active
idle-cut disable
self-service-url disable
#
interface NULL0
#
---- More ----
106