Ae-200/Ae-50/Ew-50 - Mitsubishi Electric AE-200A Instruction Book

7-2. AE-200/AE-50/EW-50

Use [AE-200/AE-50/EW-50] menu for the following operations and settings.
7-2-1. Property
Input the LAN1 IP address of the AE-200 that is the BACnet
Set the port number to 80 (fixed).
7-2-2. Acquire Settings
®
Uses the BACnet
Setting Tool screen. When changing current settings data, ensure that you select [Acquire Settings] to read the
settings data before editing. Furthermore, if you select [Acquire Settings] during editing of settings data, then
this will discard the data being edited, and refresh using the data acquired from the AE-200. Therefore, if it is
necessary to save data that is being edited, then save the data before selecting [Acquire Settings].
7-2-3. Send Settings
Sets settings data created on the BACnet
the AE-200 BACnet
mode to [Offline] before selecting [Send Settings].
Switching the AE-200 BACnet
to 7-2-4 "Mode Setting" for switching Offline/Online and for display of current situation.)
Additionally, selecting [Send Settings] will update the settings data stored in the AE-200 with that from the
®
BACnet Setting Tool. If there is no backup data for the settings data stored in the AE-200, then perform a
backup before selecting [Send Settings], and save the settings data stored in the AE-200 as below.
<<Method to backup settings data stored in the AE-200>>
(1) Use [Save Settings As...] to save the data (a) set in the BACnet
(2) Use [Acquire Settings] to acquire the settings data (b) stored in the AE-200.
(3) Use [Save Settings As...] to save the acquired data (b) (b.xml).
(4) Use [Open Settings] to read the settings data (a) (a.xml) into the BACnet
(5) Use [Send Settings] to reflect the data (a) to the AE-200.
WT07921X01
Setting Tool to acquire the settings data set for the AE-200, and displays this on the BACnet
®
®
connection mode is [Online], therefore temporarily set the AE-200 BACnet
®
connection mode from [Offline] to [Online] will restart the AE-200. (Refer
®
Setting Tool destination, and click [OK] to set.
Setting Tool on the AE-200. [Send Settings] cannot be selected when
25
®
Setting Tool (a.xml).
®
Setting Tool.
®
®
connection