3. Installation and uninstallation of BACnet
Tool
This chapter explains how to install the BACnet
If you click [Cancel] in any of the steps during the installation or uninstallation, the installation or uninstallation will
be canceled. Also, to return to the previous screen, click [Back].
3-1. Installation
(1) Starting the setup program
Double click the Integration Installer for AE-200
following two types of setting tool are required.
• AE-200 BACnet
• AE-200 Initial Setting Tool
Select the check box (
Clicking [Install] will run the installer for the selected setting tool.
*1 The name of the installer for North America is "AE-200AToolInstaller_V730.exe", and for Europe is "AE-200EToolInstaller_V730.
exe".
The following details the BACnet
Settings) for how to set up the AE-200 Initial Setting Tool.
(2) Starting the BACnet
Read the displayed information, and click [Next] to proceed.
WT07921X01
®
®
Setting Tool
) for the setting tool to install, then click [Install].
®
Setting Tool installer. Refer to the AE-200 Instruction Book (Initial
®
Setting Tool setup program
Setting Tool (SetBACnet) to a PC and how to uninstall it.
*1
. When setting the AE-200 BACnet
10
®
Setting
®
functions, the