Furuno VR-7000 Operator's Manual page 43

Alert no. Alert name
412525 Sensor(LAN) Buffer
Overflow
412527 Image(LAN) Buffer
Overflow
41253x No No.x Sensor
(x: 1 - 8) Adapter Connection
(x: 1 - 8)
412541 No No.1 VIDEO LAN
Converter Connection
412542 No No.2 VIDEO LAN
Converter Connection
412545 No Audio IF Board
Connection
41255x No No.x Radar Input
(x: 1 - 4) Image (x: 1 - 4)
41255x No No. x ECDIS Input
(x: 5 - 7) Image (x: 1-3)
41258x No No.x ECDIS
(x: 1 - 3) Attached information
Input (No.1 - No.3)
412601 No Radar1 Recording
Image Input
412602 No Radar2 Recording
Image Input
412603 No ECDIS Recording
Image Input
412604 No Additional Record-
ing Image Input
412605 No General1 Record-
ing Image Input
412606 No General2 Record-
ing Image Input
41261x No. x Radar Unrecog-
(x: 1-4) nized Image (x: 1 - 4)
41261x No.* ECDIS Unrecog-
(x: 5-7) nized Image (x: 1 - 3)
Description
Serial, analog and digital data
from Sensor Adapter are not re-
corded to Fixed DRU, Float-free
DRU and Long Term Device.
Image data from RADAR/EC-
DIS are not recorded to Fixed
DRU, Float-free DRU and Long
Term Device.
No. x Sensor Adapter is missing
(x: 1 - 8).
No.1 VIDEO LAN Converter is
missing.
No.2 VIDEO LAN Converter is
missing.
Audio IF Board is missing.
No.x Radar has been powered
off and the image data is not re-
ceived (x: 1 - 4).
No.x ECDIS has been powered
off and the image data is not re-
ceived (x: 1 - 3).
No.x ECDIS has been powered
off and the attached information
is not received (x: 1 - 3).
Image input channel that is not
valid for No.1 Radar setting is
set.
Image input channel that is not
valid for No.2 Radar setting is
set.
Image input channel that is not
valid for ECDIS setting is set.
Image input channel that is not
valid for Additional setting is
set.
Image input channel that is not
valid for No.1 General setting is
set.
Image input channel that is not
valid for No.2 General setting is
set.
VDR does not support the for-
mat of image data from No. x
Radar (x: 1 - 4).
VDR does not support the for-
mat of image data from No. x
ECDIS (x: 1 - 3)
34
3. TROUBLESHOOTING
Action
If the error re-occurs, contact
your dealer.
Contact your dealer.
Turn on the No. x Radar
(x: 1 - 4). If the error re-occurs,
contact your dealer.
Turn on the No. x ECDIS
(x: 1 - 3). If the error re-occurs,
contact your dealer.
Turn on the No. 1 or No. 2 Ra-
dar. If the error re-occurs, con-
tact your dealer.
Turn on the ECDIS. If the error
re-occurs, contact your deal-
er.
Turn on the additional units. If
the error re-occurs, contact
your dealer.
Turn on the No. 1 or No. 2
General. If the error re-occurs,
contact your dealer.
Contact your dealer.