D-Link DWL-G820 Install Manual page 8

Using the Setup Wizard
D-Link Wireless Router/Access Point Users: If you are using the
®
default SSID and channel settings, the DWL-G820 will connect right out
of the box. No configuration is needed! Simply connect the hardware
as shown on pages 6-7.
The DWL-G820 must be connected directly to your computer for
configuration. You cannot configure this device if it is connected
to a hub or router.
Connect a standard Ethernet cable from the DWL-G820 to an Ethernet
port on the computer that will be used to configure the DWL-G820.
You must assign your computer a static IP address within the same
range as the IP address of the DWL-G820. The DWL-G820's default
192.168.0.35
IP address is
the Appendix if you need assistance in assigning a static IP address
for your network adapter.
Open your Web browser and
http://192.168.0.35
type
the URL address box. Then
press the Enter or Return key.
The log-in pop-up screen
will appear.
Type admin for the user
n a m e a n d l e a v e t h e
password field blank.
Click OK.
8
with a Subnet Mask of 255.255.255.0. See
into
DWL-G820 Install Guide
D-Link Systems, Inc.