D-Link DWL-G820 Install Manual page 6

Wireless 108g gaming/bridge adapte

Hide thumbs Also See for DWL-G820:

Hardware Installation

A. Connect the power adapter to the Power Receptor on the rear

panel of the DWL-G820 and then plug the other end to a wall

outlet or power strip. The power LED will turn on to indicate

proper operation.

If you do not have a D-Link

that is using the default SSID and channel settings, please

complete the steps in section Using the Setup Wizard before

proceeding.

B. Insert one end of the Ethernet cable (included) to the Ethernet

port on the rear panel.

The Ethernet port on the DWL-G820 is Auto MDI/MDI-X.

Meaning you can use a straight-through or crossover cable to

the Ethernet Port.

DWL-G820 Install Guide

Wireless Router or Access Point

D-Link Systems, Inc.

Table of Contents